Where To Buy Liquid Calcium Chloride For Dust Control
Are you tired of having excess dust in the air ruin your outdoor event If you are a company or organization that is looking to do business outside this summer, you need to invest in premium dust control solutions with SISCU to ensure your guests, audience, and clients have a safe and comfortable outside experience this summer. With so many different product options, read more to learn where to buy calcium chloride and other dust control products.
There are many different types of dust control products, with the most popular being chloride solutions. There is Calcium Chloride and Magnesium Chloride. Both products are hygroscopic salts, meaning they absorb moisture from the air to keep the ground surface damp. This process keeps dust particles trapped and prevents them from being released into the air. Both Chloride products work the same way, with their main differences being in chloride concentration. Calcium Chloride and Magnesium Chloride are both available in flake or liquid form.
If you are looking to minimize dust production in the short term or do not have access to dust control products, you can spray your affected area with water to have the same ground dampening effect. While this method does eliminate excessive dust, it requires frequent application, vehicles, and manpower. Ultimately, water will be a more time consuming and expensive method of dust control. Another dust control solution would be to minimize both foot and vehicle traffic on your dirt or unpaved road surface. Less traffic, especially at reduced speeds, will help lessen dust production. Of course, this may not be possible if your road is a main road or a dirt lot is utilized for popular parking or event spaces. While there are alternatives to dust control products such as Magnesium Chloride and Calcium Chloride, chlorides are the most cost effective and time efficient methods of dust control.
When deciding between Calcium Chloride, Magnesium Chloride and alternative dust control methods, it is important to consider your budget, time, and desired outcome. If you are looking to control dust on a very popular ground space, it would be most effective to utilize a chloride product. If you are looking to reduce dust for a one-time less busy area, you may be able to just use water or minimize traffic.
If you are concerned with the environmental impact of your dust control solution, you should consider Magnesium Chloride, as it is more environmentally friendly compared to Calcium Chloride. For more on the environmental impacts of various dust control solutions, click here to read more. Calcium Chloride tends to be slightly more expensive compared to Magnesium Chloride due to its higher chloride concentration. With this being said, the higher the concentration, the less frequent applications are needed, making the cost difference minimal. Magnesium Chloride is more suitable to hotter temperatures, as the solution remains liquid even in extreme heat.
When choosing what brand of dust control product to purchase, you want to sure that you are getting a premium quality product with a higher chloride concentration. Products with higher chloride concentrations are more effective with less frequent applications, making them slightly more economical. If you are unsure of what brand of dust control product to choose, you can always hire a professional such as Rasevic Companies, because you can trust their product source to be of the highest quality.
SISCU offers premium high quality dust control products that are sourced from the purest and most natural minerals. Check out SISCU for all your dust control needs this summer to ensure you get the most effective product to minimize excessive dust production in any outdoor space!
Snow & Ice Salt & Chemicals Unlimited, LLC is a leading supplier of ice melt, decier, dust control, and snow removal tools and equipment with locations in Ijamsville and Silver Spring, Maryland. We are open 24/7 before, during and after every snow and ice storm.
Our snow removal and dust control customers are usually located in Washington DC, Maryland, Virginia, Delaware, Pennsylvania, and West Virginia but our products can be shipped in truckloads to anywhere in the United States.
Use Dust Down Pro Pellets to control dirt on unpaved roadways. Our pure calcium chloride formula can improve driver visibility, prevent property damage, and stop dust and dirt from entering your nose and mouth. It's time to leave dust...well, in the dust! Order Dust Down Pro and tame your wild roadways today.
They are both calcium chloride pellets! The great thing about this dust control product is if you have any left come winter it doubles as Ice melt!! The reason it works for dust control and ice melt is that the product absorbs the moisture or water so it will melt the ice or keep your road wet like after a rainstorm.
High performance dust control and soil stabilization agent designed to extend the life of gravel road and surfaces. Composed of 32% Calcium Chloride. Resists evaporation. Stabilizing effect to reduce frost damage and overall wear.
This article reviews the basic guidelines for applying calcium chloride to any unpaved surfaces in order to achieve dust control or base stabilization. It also recommends procedures for bringing an unpaved surface up to standard, as well as converting unpaved surfaces from petroleum- or lignin-based products to calcium chloride.
Calcium chloride helps control dust because it is a hygroscopic material. This means it attracts moisture from the atmosphere and environment. When calcium chloride is spread on an unpaved surface, it keeps it damp thus keeping dust down.
To achieve the best dust control and stabilization results, it is suggested the average gradation mix be used as a guide. The material specified should contain sufficient moisture to ensure compaction to design density. And when needed, incorporate any fines from the shoulder into the road mixture.
Unpaved surfaces should normally be treated with calcium chloride during the spring after seasonal rains, and while moisture still remains in the ground. However, applications should not be started during a heavy rainfall or if rain is threatening. A light mist is helpful, provided the moisture can soak into the ground and not run off.
As a rule of thumb, one car making one pass on one mile of untreated unpaved road every day can generate one ton of dust in one year. When this road is treated with calcium chloride, however, it will retain a high percentage of the fines it would otherwise lose.
Uniformly mix the soil, new aggregate (if added), and calcium chloride, plus water (if necessary). Mixing should begin as soon as possible after the calcium chloride is applied. The mix depth is the same as the scarification depth. When road mixing, the materials can be mixed by blading.
If a travelling rotary mixer is used, it should be able to separate the soil particles without fracturing them and, at the same time, disperse the calcium chloride evenly. An alternative method to road mixing is plant mixing. Plant mixing the materials assures a more uniformly blended mixture and less chance for material segregation. After the material is thoroughly mixed, it can be hauled to the site and placed on the roadway using a mechanical spreader.
Once the road is stabilized, dust control is usually maintained throughout the summer with minimal attention. However, for best results a second top dressing is recommended in late summer or early fall.
Apply a 38% solution of LIQUIDOW calcium chloride to the road surface at the rate of 0.27 gallons per square yard. Or apply 1.69 pounds of DOWFLAKE XTRA or 1.32 pounds of PELADOW per square yard. Reblade, if necessary, according to Step 5.
Apply a 38% solution of LIQUIDOW calcium chloride to the road surface at the rate of 0.27 gallons per square yard. Or apply 1.69 pounds of DOWFLAKE XTRA or 1.32 pounds of PELADOW per square yard. Reblade, if necessary, according to Step 1.
Once the road is stabilized, dust control is usually maintained throughout the summer with minimal attention. However, for best results, a second top dressing is recommended in late summer or early fall.
Because drivers frequently make sharp turns and turn-arounds in parking lots and particularly trucking terminals, you may want to increase the standard application rate of 0.27 gallons of calcium chloride per square yard when practicing dust control, as shown below.
Apply a 38% solution of LIQUIDOW calcium chloride to the unpaved surface at the rate of 0.27 gallons per square yard. Or apply 1.69 pounds of DOWFLAKE XTRA or 1.32 pounds of PELADOW per square yard. Reblade, if necessary, according to Step 1. 59ce067264